Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Partially drain the cooling system. For additional information, refer to Cooling System.
3. Remove the Engine Coolant Temperature (ECT) Sensor.
1. Disconnect the connector.
2. Remove the ECT sensor.
INSTALLATION
1. To install, reverse the removal procedure.
