Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
![background image](/ford/econoline_e150_1/2_ton/v8-4.6l_sohc_vin_w/Page-1942001.png)
Blower Motor: Service and Repair
Main Climate Control
REMOVAL
1. Remove the battery.
2. Remove the battery tray.
1
Remove the screws.
2
Remove the battery tray.
3. Move the suction accumulator/drier.
1
Remove the three screws.
2
Move the suction accumulator/drier.
NOTE: This step must be performed if the vehicle is equipped with an A/C system.
4. Remove the blower motor.
1
Disconnect the electrical hardshell connector.
2
Remove the blower motor housing tube.
3
Remove four screws.
4
Remove the retaining clip.
5
Remove the blower motor.
NOTE: To ease removal, align the flat spot on the blower motor mounting plate with the accumulator.