Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
7. Connect the compressor discharge line.
1
Lubricate the new O-ring seals with PAG oil or equivalent and install the O-ring seals.
2
Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
8. Connect the compressor suction line.
1
Lubricate the new O-ring seals with PAG oil or equivalent and install the O-ring seals.
2
Connect the compressor suction line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
9. Connect the A/C pressure cutoff switch electrical connector.
10. Install the fan shroud.
11. Install the drive belt.
12. Fill the engine cooling system.
13. Reconnect the battery ground cable.
14. Evacuate and charge the A/C system.