Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
6. Disconnect the evaporator discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
7. Disconnect the compressor suction line.
1
Remove the screw.
2
Disconnect the compressor suction line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
NOTE: If the vehicle is equipped with a standard A/C system, carry out this step. If the vehicle is equipped with an auxiliary A/C-heater system,
proceed to Step 8.
8. Disconnect the suction accumulator/drier line spring lock coupling.
NOTE: If the vehicle is equipped with an auxiliary A/C-heater system, then carry out Steps 8 and 9. If the vehicle is equipped with a standard
A/C system proceed to Step 10.