ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Housing Assembly HVAC|Removal and Installation|Page 7487 > < Housing Assembly HVAC|Removal and Installation|Page 7485
Page 5
background image

12. Install the battery tray.
13. Install the battery. 
14. Evacuate and charge the A/C system, please refer to Heating and Air Conditioning/Service and Repair/ See: Service and Repair

Auxiliary Climate Control

REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure, please refer to Heating and Air Conditioning/Service and Repair/ See: Service and

Repair

2. Remove the battery.

3. Remove the battery tray.

1

Remove the screws.

2

Remove the battery tray.

4. Drain the engine coolant system.
5. Remove the heater core housing.  See: Front/Heater Core Case 

6. Move the windshield washer reservoir cover out of the way.

1

Remove the screws.

2

Move the windshield washer reservoir cover.

7. Remove the windshield reservoir.
8. Deflect the battery tray support brackets.
9. Remove the suction accumulator/drier.

10. Disconnect the condenser to evaporator tube from the A/C condenser core and A/C evaporator core.

NOTE:  Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

Housing Assembly HVAC|Removal and Installation|Page 7487 > < Housing Assembly HVAC|Removal and Installation|Page 7485