Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
![background image](/ford/econoline_e150_1/2_ton/v8-4.6l_sohc_vin_w/Page-2057011.png)
^
Remove the lower rear body side trim panel, please refer to Body and Frame/Interior Trim/Trim Panel/Service and Repair/ See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Procedures
7. Remove the heater air plenum chamber, please refer to Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/ See:
1
Remove the screw.
2
Remove the heater air plenum chamber, please refer to Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/ See:
8. Remove the air conditioning and heater assembly.
1
Remove the screws.
NOTE: Vehicles equipped with the interior trim package have only the left two screws.
2
Remove the air conditioning and heater assembly.
NOTE: Do not spill any remaining coolant or refrigerant oil while removing the air conditioning and heater assembly.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the coolant hoses using MERPOL(R) or plain water, if needed.