Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Headlamp Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable; refer to Battery.
2. Remove the instrument panel finish panel; refer to Dash Board.
3. Remove the headlamp switch bolts.
4. Disconnect the electrical connector and remove the headlamp switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
