Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
8. Disconnect the underbody tube spring lock coupling. See: Spring Lock Coupling Disconnect Procedure.
9. Lower the vehicle.
10. Remove the condenser to evaporator tubes.
INSTALLATION
1. Service the new condenser to evaporator tube with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA
(Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B. See: Refrigerant Oil Addition.
2. Route the condenser to evaporator tube.
3. Raise the vehicle.
4. Connect the underbody tube spring lock coupling.
5. Lower the vehicle.
6. Connect the A/C evaporator core fitting.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B and install the O-ring seals.
2
Connect the A/C evaporator core fitting.
3
Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.