Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
7. Connect the condenser core refrigerant lines.
1
Lubricate the new O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C23 1-B and install the O-ring seals.
2
Connect the condenser to evaporator tube.
3
Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
8. Install the four clamps.
1
Install the clamp.
2
Install the screw.
9. Install the engine air cleaner and the air cleaner outlet tube.
10. Reconnect the battery ground cable.
11. Evacuate, leak test and charge the A/C system.