Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
![background image](/ford/econoline_e150_1/2_ton/v8-4.6l_sohc_vin_w/Page-1251001.png)
EGR Valve: Service and Repair
REMOVAL
1. Remove the engine cover.
2. Remove the Exhaust Gas Recirculation (EGR) valve.
1
Disconnect the vacuum line.
2
Disconnect the EGR valve tube fitting.
3
Remove the bolts.
^
Discard the gasket.
INSTALLATION
1. Carefully clean both sealing surfaces.
^
Install a new EGR gasket.
NOTE: The EGR valve sealing surfaces are soft metals.
2. Install the EGR valve.
^
Tighten the bolts in two stages.
^
Stage 1: Tighten the bolts to 20 Nm (15 Lb-Ft).
^
Stage 2: Tighten the bolts an additional 90 degrees.
3. Connect the EGR valve.
^
Connect the EGR valve tube fitting.
^
Connect the vacuum line.
4. Install the engine cover.