Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
1
Position the lock cylinder to RUN.
2
Using a suitable tool, push upward on the cylinder release tab through the hole in the lower shroud while pulling the cylinder outward.
10. Remove the upper steering column shroud.
11. Apply two strips of masking tape across the clockspring.
12. Remove the key-in-ignition warning indicator switch.
13. Disconnect the clockspring electrical connector and separate the air bag electrical connector from the bracket.
14. Pry the retaining clips loose.
15. Separate the wire from the two retaining clips holding the wire to the column.