Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
separately. However, if a safety belt assembly was in use during a collision, the belt and retractor must be replaced as well as the center adjust tongue and
belt and buckle assembly or the center adjust tongue and the cable and buckle assembly. When replacing safety belts and buckles, pyrotechnic safety belt
buckle pretensioners, height adjusters, safety cables and buckles, center adjust tongues and belts and retractors, use only the replacement parts specified
in the Ford Master Parts Catalogs for the make and model of the vehicle being serviced. Safety belt assemblies must not be interchanged between vehicle
models.
1. Remove the front safety belt guide cover.
2. Remove the safety belt guide.
1
Remove the safety belt guide nut.
2
Remove the safety belt guide.
3. Remove the front safety belt retractor.
1
Use the Safety Belt Bolt Torx Bit to remove the bolt.
2
Remove the front safety belt retractor.
4. Remove the front door scuff plate, the center body pillar upper trim panel and the center body pillar lower trim panel.
