Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
2. Position the front wheel spindle in a vise, and remove the snap ring from the lower ball joint.
3. CAUTION: To avoid damage to the components, do not use heat to aid ball joint removal.
Using the U-Joint Tool and appropriate Receiver Cup, remove the lower ball joint from the front wheel spindle.
4. Using the U-Joint Tool and appropriate Receiver Cup, remove the upper ball joint.
Installation
1. CAUTION: To avoid damage to components, do not use heat to aid installation.
NOTE:The upper ball joint must be installed first.
Using the U-Joint Tool and appropriate Ball Joint Adapter, install the upper ball joint.