Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
2. Remove the stabilizer bar bushing.
1
Position the Forcing Screw, Receiver Cup and Bushing Remover through the stabilizer bar bushing.
2
Press the stabilizer bar bushing out of the front axle.
Installation
1. Install the stabilizer bar bushing.
1
Position the Forcing Screw, Receiver Cup, installation cup and stabilizer bar bushing on the front axle.
2
Press the stabilizer bar bushing into the front axle until seated.
2. Install the front stabilizer bar.
