ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Automatic Transmission-4R100|Page 5235 > < Fluid - A/T|Capacity Specifications|Page 5232
Page 1
background image

Fluid - A/T: Service and Repair
Automatic Transmission-4R100

Transmission Fluid Drain and Refill 

Materials 
Removal 
All vehicles 

1. WARNING:  On vehicles equipped with an auxiliary battery, both the negative and positive battery cables must be disconnected. 

WARNING:  On vehicles equipped with a 7.3L engine, both the primary and secondary batteries must be disconnected. 

NOTE:  All gasoline vehicles will have new adaptive shift strategies. Whenever the vehicle's battery has been disconnected for any type of service
or repairs, the strategy parameters that are stored in the Keep Alive Memory (KAM) will be lost. The strategy will start to relearn once the battery
is reconnected and the vehicle is driven. This is a temporary condition and will return to normal operating condition once the Powertrain Control
Module (PCM) relearns all the parameters from the driving operating conditions. There is no time frame set for this process. If a concern is
present during down shifts or converter clutch apply, it is not the shift strategy and will require diagnosis as outlined in the workshop manual.
The customer needs to be notified that they may experience slightly different upshifts (either soft or firm) and that this condition is temporary and
will eventually return to normal operating condition.

Disconnect the battery. 

2. Raise and support the vehicle. 

3. Disconnect the connector.

4. If the vehicle is equipped with an inline transmission fluid filter, remove and discard the filter.

Vehicles equipped with a fluid pan drain plug 

Automatic Transmission-4R100|Page 5235 > < Fluid - A/T|Capacity Specifications|Page 5232