Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Shift Cable: Service and Repair
Cable and Bracket
Removal
NOTE: The 4R70W transmission is shown, this procedure is also used for the 4R100 transmission.
1. Disconnect the shift cable.
2. Push the rubber grommet and the transmission shift cable through the bulkhead.
3. Raise and support the vehicle.
4. Remove the shift cable.
1
Disconnect the cable at the manual control lever.
2
Press the lock tabs and remove the cable from the bracket.
5. Remove the shift cable bracket (all except vehicles equipped with 4.2L engine).
