Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
Shifter A/T: Service and Repair
Automatic Transmission 4R70W
Manual Control Lever Shaft and Seal
Special Tool(s)
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Drain the transmission fluid and remove the fluid pan and filter.
4. Disconnect digital TR sensor electrical connector.
5. Disconnect the transmission shift linkage.
6. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1
Remove the outer manual control lever shaft nut.
2
Remove the manual control lever.
