Econoline E150 1/2 Ton V8-4.6L SOHC VIN W (2001)
4. Position the valve body separator plate and the gaskets to the case carefully, to retain the check balls.
5. NOTE: The word UP stamped on the separator plate reinforcing plate must be visible when installed.
Install the separator plate reinforcing plate.
1
Install the separator plate reinforcing plate.
2
Install the retaining bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with silicone grease.
Install the solenoid body assembly.
1
Install the solenoid body assembly.
2
Install the nut.
3
Install the bolts and nut finger-tight.