Econoline E150 1/2 Ton V8-5.4L CNG VIN M (1998)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Front
REMOVAL
1. Remove the front disc brake rotor.
2. Use 2-3 Jaw Puller to remove the front anti-lock brake sensor indicator.
CAUTION: Discard the front anti-lock brake sensor indicator.
INSTALLATION
1. Use an appropriate size cylinder and press to install the front anti-lock brake sensor indicator.
CAUTION: The front anti-lock brake sensor indicator must be pressed on straight.
2. Install the front disc brake rotor.
Rear
For removal and installation of the rear brake anti-lock sensor indicator, refer to Differential.
NOTE: The rear anti-lock brake sensor indicator is attached to the ring gear. It is necessary to remove the ring gear in order to remove the rear anti-lock
brake sensor indicator.
Rear Antilock Brake System (RABS)
For removal and installation of the rear brake anti-lock sensor indicator, refer to Differential.
NOTE: The rear anti-lock brake sensor indicator is attached to the ring gear. It is necessary to remove the ring gear in order to remove the rear anti-lock
brake sensor indicator.
