Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
4. Push the (A) radio antenna lead in cable and the (B) grommet into the passenger compartment.
5. Remove the instrument panel finish panel; refer to Dash Board
6. Remove the cowl side trim panel.
7. Locate and follow the radio antenna lead in cable from end to end, and disconnect the retainers from the wiring harness and the wiring harness
trough.
8. Remove the radio chassis; refer to Radio, Stereo, and Compact Disc.
9. Remove the radio antenna lead in cable.
INSTALLATION
1. To install, reverse the removal procedure.