Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal With Retainer Plate
Special Tools
Removal
1. Remove the transmission.
2. Remove the oil pan.
3. Remove the flywheel.
4. Use the (A) Rear Crank Slinger Remover and the (B) Slide Hammer to remove the (C) rear oil seal stinger.
5. Use the (A) Rear Crankshaft Seal Remover and the (B) Slide Hammer to remove the (C) rear main seal.