Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
Heated Oxygen Sensor: Service and Repair
EGO Sensor Wrench
SPECIAL SERVICE TOOL(S)
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Raise the vehicle. For additional information, refer to Maintenance/Service and Repair.
3. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.
4. Using the special tool, remove the HO2S.
INSTALLATION
1. To install, reverse the removal procedure.