Econoline E250 3/4 Ton V8-4.6L SOHC VIN W (2000)
Pinion Flange: Service and Repair
Ford 8.8-Inch IRS
Special Tools
Removal
1. Raise and support the vehicle.
2. Remove the rear wheel and tire assemblies.
3. CAUTION: Remove the brake drums to prevent brake drag during drive pinion bearing preload adjustment.
Remove the brake drums.
4. Mark the driveshaft flange and pinion flange for correct alignment during installation.
5. Remove the four driveshaft bolts and disconnect the driveshaft.