Econoline E250 3/4 Ton V8-5.4L CNG VIN M (1998)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Remove the EGR vacuum regulator solenoid
1. Remove the vacuum connector.
2. Disconnect the electrical connector.
3. Remove the nuts.
4. Remove the EGR vacuum regulator solenoid.
INSTALLATION
1. Install the EGR vacuum regulator solenoid.
1. Position the EGR vacuum regulator solenoid.
2. Install the two nuts.
3. Connect the electrical connector.
4. Connect the vacuum connector.