Econoline E250 3/4 Ton V8-5.4L CNG VIN M (1998)
2. Position the front axle into the pivot bracket and install the pivot bolt and nut hand-tight.
3. Inspect the radius arm insulators for wear or damage. Replace as necessary.
4. Install the radius arm.
(1) Install the washer, insulator and spacer and pull the radius arm through the bracket.
(2) Install the rear insulator, washer and nut and tighten hand-tight.
5. Install the spring insulator.
(1) Install the spring retainer and insulator.
(2) Install the radius arm-to-axle nut and bolts
