Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
2. Measure the clearance between the rear anti-lock brake sensor pole piece and the rear anti-lock brake sensor indicator.
3. Install the rear anti-lock brake sensor.
1
Position the sensor and install the bolt.
NOTE: Do not apply force to the plastic rear anti-lock brake sensor connector. The rear anti-lock brake sensor flange should slide to the
mounting surface.
2
Connect the electrical connector.
Front
REMOVAL
1. Remove the front disc brake rotor.
2. Detach the front anti-lock brake sensor wire from the front brake hose.
1
Disconnect the front anti-lock brake sensor electrical connector.
2
Detach the front anti-lock brake sensor wire from the front brake hose.