Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Front Engine Plate: Service and Repair
Removal
WARNING:
-
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
-
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING.
1. Disconnect the battery ground cable.
2. Remove the valve covers.
3. Remove the radiator.
4. Disconnect the Camshaft Position (CMP) sensor connector.
5. Remove the water pump.
6. Raise and support the vehicle.
7. Remove the bolts and the power steering pump. Set aside.
NOTE: Only three bolts are required to secure the power steering pump.