Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Engine Mount: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the throttle body.
3. Remove the vapor management valve.
4. Partially drain the cooling system and disconnect the upper radiator hose at the radiator.
5. Remove the two upper screws and position the fan shroud toward the engine.
6. For the RH front engine support insulator, remove the starter motor.
7. Remove the nuts.
8. Remove the nut.
9. Raise and support the vehicle.