Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Front Crankshaft Seal: Service and Repair
REMOVAL
1. Remove the crankshaft pulley.
2. Use the (A) Front Cover Seal Remover to remove the (B) crankshaft front seal.
INSTALLATION
1. Lubricate the (A) engine timing cover seal bore and the (B) crankshaft front seal inner lip.
-
Use Super Premium SAE 5W30 motor oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G.
2. Use the (A) Crankshaft Seal Replacer/Aligner to install the (B) crankshaft front seal into the (C) engine timing cover.
3. Install the crankshaft pulley.