Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Seat Belt Height Adjuster: Service and Repair
Removal and Installation
Safety Belt Bolt Bit
Special Tool(s) Required
Removal
1. Remove the front seat shoulder strap guide cover.
2. Remove the shoulder strap guide.
1. Remove the shoulder strap guide nut.
2. Remove the shoulder strap guide.
3. On the driver side, remove the body side trim finish panel and the front upper body side trim panel.
4. On the passenger side, remove the center body pillar upper trim panel.
5. Remove the height adjuster cover.