Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Steering Damper: Service and Repair
REMOVAL
1. Remove the nut retaining the damper to the bracket on the steering linkage.
2. Remove the nut and bolt retaining the damper to the RH damper bracket.
NOTE: The RH damper bracket and the steering linkage bracket can be removed from the vehicle, if necessary, by removing the retaining bolts
and nuts.
3. Remove the damper from the mounting brackets.
INSTALLATION
1. Install the damper into the mounting brackets.
NOTE: When installing a new steering linkage bracket, make sure the bracket is properly positioned on the steering sector shaft arm drag link
before tightening the U-bolt retaining nuts.