Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
Radius Arm: Service and Repair
REMOVAL
1. Remove the front coil spring.
2. Remove the spring insulator.
(1) Remove the radius arm-to-axle nut and bolt.
(2) Remove the spring retainer and insulator.
3. Remove the radius arm.
(1) Remove the nut.
(2) Remove the washer and rear insulator.
(3) Pull the radius arm from the bracket, and remove the spacer, insulator and washer.
INSTALLATION
1. Inspect rubber parts for wear or damage. Replace as necessary.