Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
12. Press the fluid filter and seal assembly into the pump bore until seated.
NOTE: Prior to installation, lightly lubricate the seal with clean MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R) V
equivalent.
13. Position the (A) gasket onto the cleaned fluid pan. Make sure the (B) magnet is positioned over the dimple in the fluid pan.
NOTE: Apply a light coat of petroleum jelly to hold the gasket to the fluid pan. The fluid pan gasket is reusable if not damaged.
14. Install the (A) pan with the gasket. Alternately tighten the (B) bolts.
15. Connect the connector.