Econoline E250 3/4 Ton V8-5.4L SOHC VIN L (1998)
17. Remove the axle U-bolt nuts and the axle U-bolts.
18. While watching for obstructions, raise the hoist until the vehicle is clear of the axle and tires.
19. Roll the axle, with the housing support, from under the vehicle.
INSTALLATION
1. With the vehicle raised to the appropriate height to clear the axle and tires, and the front of the axle housing supported, roll the axle under the
vehicle and position it for installation.
2. While watching for obstructions, lower the hoist until the spring positioning pins contact the axle housing pad. While adjusting the hoist as
required, have an assistant align the spring positioning pins to the axle pads.
3. Install the axle U-bolts and snug the axle U-bolt nuts.
4. Alternately tighten the axle U-bolt nuts.
5. Adjust the hoist as required. Install the shock absorber to the brackets at the axle.