Econoline E350 1 Ton V10-6.8L VIN S (1998)
Wheel Cylinder: Service and Repair
Disassembly And Assembly
DISASSEMBLY
1. Disassemble the rear wheel cylinder.
1
Remove the rubber boots.
2
Remove the rear wheel cylinder pistons
3
Remove the cups.
4
Remove the expander.
5
Remove the wheel cylinder bleeder screw from the rear wheel cylinder.
NOTE: Removal is not necessary to disassemble. inspect, hone or overhaul the rear wheel cylinder.
ASSEMBLY
1. Follow the disassembly procedure in reverse order
NOTE: Coat all the rear wheel cylinder parts with Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid
meeting Ford specification ESA-M6C25-A.