Econoline E350 1 Ton V10-6.8L VIN S (1998)
9. Install the inner timing chain/belt on the crankshaft sprocket with the timing marks aligned.
10. Install the timing chain/belt on the camshaft sprocket with the two chain links and timing marks aligned.
NOTE: Be sure the upper half of the timing chain/belt is below the tensioner guide dowel. If necessary, use the Camshaft Positioning Tool to
adjust.
11. Install the outer crankshaft sprocket and timing chain/belt with the long hub of the crankshaft sprocket facing inward.
CAUTION: The camshaft sprocket can jump time if the Camshaft Holding Tool is not secured.
NOTE:
-
Be sure the chain link and crankshaft sprocket timing marks are aligned.
-
The lower half of the timing chain/belt must be positioned above the dowel.
12. Position the timing chain/belt on the camshaft sprocket. Make sure the two copper-colored links align with the camshaft sprocket timing mark.