Econoline E350 1 Ton V10-6.8L VIN S (1998)
22. Apply a bead of silicone along the cylinder head-to-block surface and the oil pan-to-block surface.
-
Use Silicone Gasket and Sealant F6AZ-19562-A or equivalent meeting Ford specification WSE-M4G323-A6.
NOTE:
-
The timing chain/belt is removed for clarity.
-
If not secured within 4 minutes, sealant must be removed and the sealing area cleaned with solvent. Allow to dry until there is no sign of
wetness, or 4 minutes", whichever is longer. Failure to follow this procedure can cause future oil leakage.
23. Install engine timing cover.