Econoline E350 1 Ton V10-6.8L VIN S (1998)
Blower Motor: Service and Repair
Blower Motor
REMOVAL
1. Remove the battery.
2. Remove the battery tray.
1. Remove the screws.
2. Remove the battery tray.
3. Move the suction accumulator/drier.
1. Remove the three screws.
2. Move the suction accumulator/drier.
NOTE: This step must be performed if the vehicle is equipped with an A/C system.
4. Remove the blower motor.
1. Disconnect the electrical hardshell connector.
2. Remove the blower motor housing tube.
3. Remove four screws.
4. Remove the retaining clip.
5. Remove the blower motor.
NOTE: To ease removal, align the flat spot on the blower motor mounting plate with the accumulator.