Econoline E350 1 Ton V10-6.8L VIN S (1998)
4. Install the two A/C condenser mounting brackets.
1. Install the A/C condenser mounting bracket.
2. Install the screw.
5. Position the radiator.
6. Install the two upper radiator mounting brackets.
1. Install the upper radiator mounting bracket.
2. Install the screws.
7. Install the condenser core refrigerant lines.
1. Lubricate the new O-rings with clean Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install
the O-rings.
2. Connect the condenser to evaporator tube.
3. Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.