Econoline E350 1 Ton V10-6.8L VIN S (1998)
6. Install the forward clutch piston return spring, with the (A) spring fingers against the (B) forward clutch piston apply ring. Make sure the (C) notch
is positioned so that both ends of the (D) forward clutch piston apply ring are visible.
CAUTION: To ensure durability, the notch between the spring fingers must be positioned so that both ends of the forward clutch piston apply
ring are visible.
7. Install the forward clutch piston return spring retaining ring. Make sure it is properly seated in the groove.
8. Install the (A) bottom forward clutch pressure plate with beveled face downward, the (B) forward clutch pressure spring, the (C) clutch pack
(number of plates are model-dependent), and the (D) top forward clutch pressure plate.
9. Install the selective forward clutch pressure plate retaining ring.