Econoline E350 1 Ton V10-6.8L VIN S (1998)
2. Assemble the differential clutch packs (without the shims and Belleville springs) on the respective differential side gears.
NOTE: Do not mix the differential clutch packs or shims from one side with the other.
NOTE: The Belleville spring is a dished plate.
3. Clamp the bolt head of the Traction-Lok Clutch Gauge in a vise. Install the differential clutch pack and the differential side gear (without the shim
or the Belleville spring) on the gauge.
NOTE: Use the Traction-Lok Clutch Gauge Mandrel for the procedure.
4. Position the Traction-Lok Clutch Gauge on top of the differential clutch pack .