Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
2. Use the Crankshaft Damper Replacer to install the crankshaft pulley.
3. Tighten the crankshaft pulley bolt in four stages.
Stage 1: 90 Nm (66 ft. lbs.)
Stage 2: Loosen 360 degrees
Stage 3: 47-53 Nm (35-39 ft. lbs.)
Stage 4: Rotate 85-90 degrees
4. Lower the vehicle.
5. Install the drive belt.
6. Install the engine cooling fan and the fan shroud.
