Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Air Door Actuator / Motor: Service and Repair
Air Door Actuator
Auxiliary Vent Door Vacuum Control Motor
REMOVAL
1. Remove the air conditioning and heater assembly.
2. Remove the vacuum line.
3. Remove the vacuum control motor.
1
Remove the screw.
2
Unsnap and remove the vacuum control motor.
4. Disconnect the vent door from the vacuum control motor.
INSTALLATION
1. To install, reverse the removal procedure.
Air Inlet Door
REMOVAL
1. Disconnect the battery ground Cable.
2. Remove the instrument panel finish panel.