Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
5. Disconnect the A/C evaporator core fitting.
1
Remove the screw.
2
Disconnect the A/C evaporator core fitting.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Remove the condenser to evaporator tube.
INSTALLATION
1. Service the new condenser to evaporator tube with the proper amount of PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or
equivalent meeting Ford specification WSH-M1C231-13.
2. Route the condenser to evaporator tube.
3. Connect the A/C evaporator core fitting.
1
Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-M1C231-B and install the O-rings.
2
Connect the A/C evaporator core fitting.
3
Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
4. Connect the condenser core refrigerant lines.
1
Lubricate the new O-rings with PAG compressor oil, Motorcraft YN-12c, F7AZ-19589-DA, or equivalent meeting Ford specification
WSH-MIC231-B and install the O-rings.
2
Connect the condenser to evaporator tube.
3
Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.