Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Raise the transmission jack until the (A) transmission insulator and retainer studs are separated from the (B) transmission support crossmember.
7. Remove the (A) bolts and the (B) transmission insulator and retainer.
8. If equipped disconnect the (A) harness connector and position it aside. Remove the (B) bolt and the (C) vehicle speed sensor (VSS).
9. NOTE: Econoline Super Duty applications use a special extension housing similar to 4x4.
NOTE: As the fasteners are removed, note the size of each for proper location during installation.
With a suitable drain pan properly positioned, remove the 8 (A) bolts, the (B) stud and the (C) extension housing.
10. Remove and discard the extension housing gasket.
Installation