Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Install the EPC check ball spring.
4. Position the valve body separator plate and the gaskets to the case carefully, to retain the check balls.
5. NOTE: The word UP stamped on the separator plate reinforcing plate must be visible when installed.
Install the separator plate reinforcing plate.
1
Install the separator plate reinforcing plate.
2
Install the retaining bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with Silicone Brake Caliper Grease and Dielectric Compound
D7AZ-19331-A (Motorcraft WA-10) or equivalent meeting Ford specification ESE-MlC171-A.