Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Special Tools
Removal
1. Remove the pinion flange.
2. Pry up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.
Installation
1. Lubricate the new pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and install a new one.
Using the special tool, install the pinion seal.
3. Install the pinion flange.