Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Universal Joint: Service and Repair
Universal Joint-Single Cardan, Flange Yoke
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft m a vise or similar holding fixture.
Place the driveshaft on a suitable workbench, being careful not to damage the tube.
3. NOTE: If components are not marked and installed correctly, driveling imbalance can occur.
Index-mark the positions of the driveshaft components.
4. Clamp the U-Joint Tool in a vise.
5. Remove all four of the snap rings.