Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Sliding Door Handle: Service and Repair
Handle-Single Latch or Sliding Door, Outside
Removal
1. Remove the door trim and watershield.
2. Front door and sliding door: disconnect the outside door handle-to-latch rod from the retaining clip.
3. Right rear door: remove the licence plate housing screws and pull the housing away from the door.
4. Right side hinged and right rear door: disconnect the cable from the door handle lever.
5. All doors except sliding door: drill out the rivets and remove the door handle.
6. Sliding door: remove the nuts and remove the door handle.
Installation