Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Parking Brake System: Adjustments
Cable Adjustment
1. Raise and support the vehicle.
Cable Adjustment
2. Disconnect the adjusting clevis.
1. Remove the clevis pin locking pin.
2. Remove the clevis pin, and disconnect the adjusting clevis from the parking brake lever.
Cable Adjustment
3. Set the adjusting clevis.
1. Loosen the jam nut several turns.
2. Position the parking brake lever in the applied position.
3. Tighten or loosen the adjusting clevis until the adjusting clevis hole lines up with the parking brake lever hole, and then loosen the adjusting
clevis 13 mm (0.5 inch).
Cable Adjustment